|
|||||
| SCADA system | |||||
| GWDT offers Elipse Scada software which is compatible
with Altus PLC ; the specification of E3 (Elipse Scada software ) is described
below:
E3 is a SCADA (Supervisory Control and Data Acquisition)
system that offers an advanced model of objects, a powerful graphic interface
and a new and unique architecture allowing fast application development
and ultimate connectivity to features and other applications. Systems built with E3 usually start from real-time data collection to supervisory control systems, such as PLCs (Programmable Logic Controllers), RTUs (Remote Terminal Units), DAQs (Data Acquisitions), Multi-Loop or Single- Loop controllers. E3 Example of Application development for several automation projects. |
|||||
|
|||||
| Figure 1: Dose System | ![]() |
||||
| This application operates similarily to an electronic scale. Each production batch definition can be loaded and later transferred to a tank through the belt. The operation can happen automatically or manually. | |||||
| Figure 2: Water Treatment System | ![]() |
||||
This application simulates the operation of a WTA (Water Treatment Station). The greater reservoir indicates the impure water entrance that further receives chemical products for cleaning and other additives. |
|||||
| Figure 3: Chemical Treatment of Plates | ![]() |
||||
| This example illustrates the plate or part arrival in a stand for thermal treatment in an induction oven. The parts are taken to the oven through a mechanical arm. After the configuration time expires, the arm moves to another stand. The operation can happen automatically or manually. | |||||
| Figure 4: Pharmaceutical Production | ![]() |
||||
| This application simulates the process of manufacturing pharmaceutical products. Raw materialsare transferred to a reactor and then taken to a catalysis process. All operation valves and pumps are controlled through libraries | |||||
| Website: www.elipse.com.br | |||||
|
|||||